Kentec control platforms
Open-protocol and suppression control platforms selected around loop protocol, capacity, networking and approvals.
What to establish before changing a system
A shared brand name does not guarantee interoperability. Confirm the panel model, firmware, loop card, device generation, software access, approved configuration and installed equipment before proposing a change.
- 01Panel model and supported protocolCheck the installed panel, firmware, device generation, software access and approved configuration.
- 02Loop, network and cause-and-effect capacityCheck the installed panel, firmware, device generation, software access and approved configuration.
- 03Suppression or fire-alarm approvalsCheck the installed panel, firmware, device generation, software access and approved configuration.
- 04Configuration tools and service accessCheck the installed panel, firmware, device generation, software access and approved configuration.
Relevant brands and manufacturers
Marine addressable control in the specified Syncro ASM configuration
Ampac
Marine fire detection and alarm control in approved configurations
Air Products & Controls smoke and carbon-monoxide sensing solutions for HVAC, building automation and life-safety applications.
Autronica
Autronica for fire detection and control.
Cerberus Siemens
Cerberus Siemens for fire detection and control.
Consilium
Consilium for fire detection and control.
Services for this requirement
We confirm service availability for the country, system and project requirements.
Technical Resources
Writing a fire-alarm cause-and-effect matrix
Organize initiating events, outputs, interfaces, timing, reset and test requirements.
Read resource
Relays and interfaces in fire systems
How dry contacts, monitored inputs, outputs and isolation affect integration.
Read resource
Rehoming, subpanels and mimic panels
Clarify common panel expansion and annunciation terms before modifying a system.
Read resourceFrequently Asked Questions
Can devices from different protocols share one loop?
Usually not unless the control equipment and a specifically approved interface support that arrangement. Confirm exact compatibility.
Can an obsolete panel be replaced without changing field devices?
Sometimes, but only after checking loop protocol, device generation, loading, isolators, cause-and-effect and approval implications.
What should be captured before programming changes?
Back up the current configuration, identify the software and firmware versions, document the intended change and plan witnessed functional tests.