Mainland China Fire Safety Requirements
Mandatory national codes, product requirements, local review and system testing for projects in Mainland China.
- Use the mandatory national codes that apply to the building and fire protection facilities.
- Confirm local design review and completion procedures with the Chinese project team.
- Find out which Chinese standards and product certificates apply to the models you plan to buy.
Apply GB 55037 and GB 55036 to the Fire Protection Design
GB 55037 covers general fire protection requirements for buildings and GB 55036 covers fire protection facilities. Their mandatory provisions must be applied with the standards referenced by the design.
The local project team should identify every code and edition on the design basis.
Check Chinese Product Standards and Certification
A product sold in another country may need different approvals in China. Ask your supplier which Chinese standard applies and for the certificates, inspection reports or listings for the exact model.
System components must also be compatible with the approved design.
- Chinese product name and model
- Applicable GB standard
- Required product certificates
- Panel, device and software compatibility
Complete Local Review, System Testing and Acceptance
Local authorities and project professionals administer design, construction and completion requirements. Agree the test plan and required records before installation is finished.
Keep the fire systems maintained and review them when the building use or layout changes.
Mainland China Fire Safety Project Checklist
Apply GB 55037 to the building, GB 55036 to fire protection facilities and the detailed standards referenced by the design.
Coordinate use, fire compartments, escape, water supply, alarms, suppression and smoke control.
Confirm the exact Chinese standard, certification or inspection documents and system compatibility.
Prepare construction records, test results, acceptance documents, as-built drawings and maintenance plans.
Frequently Asked Questions
Which national codes cover building fire protection in Mainland China?
GB 55037 covers building fire protection and GB 55036 covers fire protection facilities. The design will also reference more detailed standards.
Does every fire product need the same certification?
No. Different product categories have different requirements under Chinese rules. Ask your supplier which certificates you need for the model you are ordering.
Can an international certificate replace a Chinese product requirement?
Usually not by itself. Confirm the applicable Chinese standard and required certification or inspection documents with the responsible local project team. Alarm Supply can help compile the available product documents. Contact us to discuss your project.
Who confirms the design review and completion process?
Use the responsible Chinese design institute, project professionals and local authorities to confirm the current procedure.
What needs to be tested as a complete system?
Test alarms, water supplies, pumps, sprinklers, smoke control, fire doors, lifts, emergency power and all required interfaces.
What documents should be retained after handover?
Keep approved and as-built drawings, equipment records, inspection and test results, operating instructions and maintenance records.
Official references
Information is based on reviewed sources and our experience at the date shown. Use it at your own risk and verify current codes, certificates and project conditions. Report an issue or suggest a correction.