Hazardous-area equipment conformity
Baseefa Ex Certification for gas and flame detectors
Testing and certification of equipment for explosive atmospheres; Baseefa is an issuing body, not a separate universal technical requirement.
Where it matters
Where Baseefa Ex Certification applies
Important when the certificate is issued by Baseefa/SGS and the project needs the associated UKEX, ATEX or IECEx route.
Chemical processing
Mining
Hazardous industrial areas
Certification coverage
How to interpret this certification
Each certificate covers specific products and uses. These details explain what is covered.
BASEEFA
Understanding the mark
What the mark or label means
Baseefa is an issuing certification body name, not a separate technical mark. The product plate should show the actual route - such as IECEx, ATEX or UKEX - and its certificate number.
Fire safety products often covered
- Gas and flame detectors
- Intrinsic-safety barriers
- Hazardous-area sounders and beacons
- Cable glands and enclosures
- Other Ex electrical equipment
Points to check before you buy
- 01
Older certificates may show the Baseefa name while newer business records may refer to SGS. Verify the current certificate status.
- 02
Do not write 'Baseefa approved' without recording the actual scheme, standard and Ex marking.
- 03
Match all certificate suffixes and schedules, especially special conditions of use.
Before you buy
What to check before relying on this certification
Certification is normally limited to a named model, configuration, standard and use. These checks turn a marketing claim into a procurement record.
- 01
Match zone or division, equipment category or protection level, gas or dust group and temperature class.
- 02
Read the complete Ex marking and certificate number, including suffixes such as X or U and their special conditions.
- 03
Confirm ambient range, ingress protection, cable entries, glands, barriers and installation method.
- 04
Check whether the project requires ATEX, IECEx, a national approval, or more than one route.
Matched products and brands
Browse all products
Products recorded with Baseefa Ex Certification
Looking for a product with this approval?
Tell us the product and approval you need. Our team will help you find a suitable model and its certificate.
To find out more
Links & Sources
Standards, listings and certificate status can change. Use the issuing body’s source before final approval.
Knowledge base
Certification guides and comparisons
Practical guides to product certificates, approval schemes and project specifications.
GuideATEX vs IECEx: what purchasers need to distinguish
Separate EU legal conformity from the international IECEx certification system and verify the complete Ex marking.
Read article
GuideHow to read an Ex label
A part-by-part orientation to common IECEx and ATEX equipment markings.
Read article
GuideHow to verify a fire safety product certificate
A repeatable check of the certificate holder, model schedule, standard, approved applications, status and special conditions.
Read article
Knowledge base
Explore every technical guide
Browse standards, product selection, system design, maintenance and market-specific guidance.
View all resourcesCommon Questions
Frequently Asked Questions
Is Baseefa a certification standard?
No. Baseefa is the historic name of an Ex certification body. The certificate identifies the actual IECEx, ATEX, UKEX or other route.
Can an old Baseefa certificate still be used?
Possibly, but its current validity, successor-body status and project acceptance must be checked from the original certificate.
Does Baseefa Ex Certification apply to every product made by a certified brand?
No. It normally applies only to the models, variants, uses and conditions named in the current certificate or listing.
What should I include in a purchase order?
State the exact model, required certification and standard, destination market, documents to be supplied and any system compatibility or witnessing requirements.